Staybull African Mahogany eco-friendly hardwood flooring information

Staybull African Mahogany eco-friendly exotic hardwood flooring

Staybull African Mahogany

Staybull Flooring™ products are processed from solid kiln-dried lumber and rips. These flooring materials should be acclimated and installed in accordance with the National Wood Flooring Association recommendations. As each installation is unique, we urge you to
contact us and a professional flooring installer for recommendations concerning jobsite evaluation and installation. Please contact your Staybull Flooring™ representative with any questions and view our website for general tips and guidelines on installation.

Common Name :

African Mahogany

Botanical Name :

Khaya Ivorensis

Raw Material Source:

Africa

Product Description:

Edge glued plank flooring

Grade:

Staybull Flooring™ Select and Better

Knots:

Closed pin knots allowed.

Checks/Cracks:

Selected for minimal surface checking in up to 5% of pieces allowable.

Grain Pattern:

Grain is straight to interlocked.

Percentage Sapwood:

Selected for minimal sap, up to 10% allowable.

Color:

African Mahogany heartwood ranges from light to deep reddish-brown in color.

Weight:

2.2 lb/Sq. Ft. Approx.

Standard Dimensions:

Thickness: 3/4” (19mm)
Width: 5” Face (127mm)
Length: 1’ – 7’ (.304 – 2.13 meters), Average lengths are 3.5’ (1.06 meters) or longer.

Edges:

Tongue and Groove with micro bevel.

Ends:

End matched tongue & groove – no micro bevel.

Textures Available:

Smooth

More Info

Installation:

Staybull Flooring™ can be installed on and above grade level. It is not recommended that this flooring be
installed below grade. Installation procedures may vary, see installation instructions, maybe installed over
plywood subfloor or glued to a well aged concrete slab (12 months or older).

Moisture Content:

Shipped at 6%-8.5% average. Moisture content may vary some based on the humidity level of the
installation site. Therefore, we recommend flooring be acclimated on the job site in the same environment
in which it will remain once installed, for a period of 1 to 3 weeks.

Finishes:

Pre-finished with Ceramic UV Cured Finish.

Stability:

Will expand and contract slightly less than Red Oak.

Waste:

We recommend 5% – 10% cut and waste on traditional sub floor installations.

Janka Rating:

830
Advantage Flooring products are processed from solid kiln-dried lumber and rips. These flooring materials should be acclimated and installed in accordance with the National Wood Flooring Association recommendations. As each installation is unique, we urge you to contact us and a professional flooring installer for recommendations concerning jobsite evaluation and installation. Please contact your Advantage Flooring representative with any questions and view our website for general tips and guidelines on installation.